Cambridge Audio Azur 340R Bedienungsanleitung PDF herunterladen (Seite 12)

To setup your speaker configuration, press the OSD button on the

remote to activate the On-Screen Display (OSD). Note: You must be

connected to a TV/Monitor by Composite or S-Video connections first.

Highlight the ‘Speaker Configuration’ menu by using the Volume

Up/Down buttons on the remote and press the Enter button:

Now move down and by highlighting each speaker in turn and using the

Left and Right arrows select from ‘Large’, ‘Small’ or ‘None’ for each

speaker:

‘Large’ or ‘Small’ are used to describe each speaker in terms of bass

response, they do not necessarily reflect the actual physical size of the

speaker.

Large = Speakers with an extended low frequency response of

approximately 20-40Hz to 16-20kHz (floorstanders or high quality larger

stand-mounted speakers).

Small = Speakers with a less extended low frequency response of

approximately 80-100Hz to 16-20kHz (small stand-mounted, bookshelf

or satellite speakers).

Setting each speaker allows the 340R to perform what is called Bass

Management and to direct low frequency bass from music and the Low

Frequency Effects channel of surround sound material to those

speakers best able to reproduce it. If you do not wish to use any of the

speakers change it’s setting to ‘None’.

The Subwoofer output can also be set to ‘Yes’ or ‘No’. If no sub is being

used make sure this setting is set to ‘No’ to allow the 340R to re-direct

the bass information in this channel to other speakers.

Note: The 340R will force some speakers to certain settings in some of

the following circumstances!

The Front Left and Right speakers may be ‘Large’ or ‘Small’ but never

‘None’ as they are always required for any type of music/movie

reproduction.

Bass must always be reproduced by either the Front Left and Right or

Subwoofer channel (or both). The 340R will thus not allow a

combination of ‘Small’ front speakers and no subwoofer.

If the Front Left and Right cannot reproduce low frequency bass a

Subwoofer must be used i.e. If the Front Left and Right are set as ‘Small’

the Sub must be Set to ‘Yes’.

Also, setting the Front Left and Right as ‘Small’ will always set the other

speakers as ‘Small’ (and the Sub to ‘Yes’). This is because LFE/ bass

information should not be redirected to the surround channels.

To store the setting simply come back out of the OSD (pressing the OSD

button always moves back one menu item, and then exits and stores

from the main menu screen).

340R setup

The setup of the 340R is a 5 stage process as follows:

1. Speaker configuration.

2. Speaker delay

3. Level calibration

4. Source setup (2 settings)

- Source audio type

- Source video type

5. Assigning video sources

1. Speaker configuration

See below for a typical 5.1 Speaker configuration. Five (5) main

speakers are used plus a Subwoofer (the .1) for bass:

Front Left and Right speakers

For stereo and multi-channel sound.

Centre speaker

For dialogue and centre sounds. Ideally position at a similar height to the

front left and right speakers (above or below the TV/monitor). Using a

centre speaker from the same manufacturer/range as used for the front

left and right speakers is advisable. This ‘timbre matching’ allows

surround effects to flow more naturally from left to right without obvious

transitions between the speakers.

Surround Left and Right speakers

For ambient and multi-channel sound. Floorstanding speakers should be

angled towards the listening position. Bookshelf/standmount speakers

should be wall mounted or used with dedicated speaker stands,

positioned at or above ear height.

Subwoofer

For improving the bass in your system, as well as reproducing dedicated

LFE cinema effects when playing Dolby Digital or DTS encoded discs.

Your subwoofer can often be placed almost anywhere in the room as

bass is less directional, but experimentation with positioning is

recommended.

The 5.1 relates to the maximum number of speakers that can be used,

as the Centre, Sub and Surround speakers can all be deleted if required

(although of course performance is reduced). For example, if you choose

not to use a Centre Channel speaker you can set this to ‘None’ in the

settings as shown later and the 340R will automatically redirect the

centre channel audio information into the Left and Right Front channels,

creating what is known as a ‘Phantom Centre’.

Similarly, you might decide not to use a subwoofer if your main Left and

Right speakers are capable of reproducing enough bass for a satisfying

music/movie experience. The 340R will then automatically re-direct the

bass from the Subwoofer/Low Frequency Effect channel to the Left and

Right Front Speakers.

Enter

Vol

Speaker Configuration

Speaker Delay

Level Calibration

Input Setup

Output Setup

Input Assign

OSD Setup

Bass/Treble Config.

Sub Setup Menu

Quit : [OSD] Ver1.1

azur 340R V1.0 Menu

OSD

1 1

5.1

Speaker Config Menu

Front L/R :Large

Center :Small

Surr. L/R :Small

Subwoofer :Yes

[FL/R Must Set Large

When Sub. set Off]

Return To Menu : [OSD]

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Cambridge Audio Azur 340R Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern