Cambridge Audio 540D Bedienungsanleitung PDF herunterladen (Seite 18)

DivX/MP4 playback

Using the right cursor of the remote control, highlight OK (Yellow) and

press Enter to view the Registration Code. Make a note of this Code and

then press Enter (OK) to finish.

Enter this code when prompted by the player program. www.divx.com

will then download an Activation File to the DivX Player Program that will

appear under Download Manager (Media Library). This file should then

be copied to a CD-R using the DivX Player Programme in the normal way

(i.e. dragged from the Download Manager and dropped to ‘Burn to

Disc’).

This Activation File should then be played back on the 540D V2 to

complete the DivX VOD Activation. When this disc is inserted into the

540D V2, an AVI file will appear on-screen in a Sub Folder. Press Enter

or Play and a short DivX message will appear on-screen to confirm that

the activation has been successful.

Note: This action should only be performed once on the 540D V2.

Custom installation (C.I.) use

The 540D V2 features a Control Bus input/

output that allows un-modulated remote control

commands (positive logic, TTL level) to be

received electrically by the unit and looped to

another unit if desired. These control commands

are typically generated by custom installation

(multi-room) systems or remote IR receiver

systems. The Control Bus sockets are colour-

coded orange.

An IR Emitter Input is also provided that allows modulated IR remote

control commands to be received electrically by the unit. Commands on

this input operate only the unit and are not looped out demodulated on

the Control Bus Output. This feature is useful for multi-room systems

(such as the Cambridge Audio Incognito multi-room system) which

feature routed I.R. emitter outputs. Instead of using window emitters

covering the CD player’s front panel IR receiver, a mono 3.5mm mini-

jack-to-3.5mm mini-jack lead can be used for a more reliable electrical

connection.

The 540D V2 also features a ‘direct’ IR/Control code for On/Off that can

be accessed on the supplied remote control for teaching into C.I.

systems as follows:

Press and hold Standby. The remote first generates its standby (toggle)

command. Keep the button held down — after 12 seconds a ‘DVD Player

On’ command will be generated. If the button is still held down for a

further 12 seconds, a ‘DVD Player Off’ command is generated.

A full code table for this product is available on the Cambridge Audio

website at: www.cambridge-audio.com

If a disc (CD or DVD) containing DivX/MP4 files is loaded, the 540D V2

will detect these file types and show a special folder navigation screen

as below:

Navigate the folders using the navigation arrows () to highlight

the desired movie clip. Press Play or Enter to start playback of that file.

Note: If there are multiple DivX/MP4 files in one folder, you can also

select them by using ‘Go To’ on the remote control, and then pressing

the required file number.

Once playing a file you can still use the ‘Go To’ button. Press once for file

number entry, or press twice to enter a specific time to jump to (as

elapsed time since start of that file).

During playback the Play, Pause, Stop and Forward/Reverse Scan

buttons work as for CD/DVD. Back and Forward Track Skip select the

last/next DivX/MP4 file in the folder.

DivX Video On Demand

The 540D V2 is able to playback DivX encoded content downloaded to

a PC from suitable websites, and then burnt to a disc for playback in the

unit. To enable this service your 540D V2 needs to be activated and

registered with DivX as explained below. See www.divx.com for more

details about the DivX VOD service in general.

DivX VOD registration

To enable DivX Video On Demand playback for the Azur 540D V2, you

have to first register the device (540D V2) through the DivX Player

Programme on your PC.

The procedure is as follows: launch www.divx.com in an internet browser

on your PC and then select the ‘Free Download’ button on the website to

install the DivX Player Program (version 6.8 is the latest at the time of

writing).

Once installed open the DivX Player Program and go to Tools — Device

Manager — Register Device. Then follow the on-line instructions where

you will be asked for a DivX Video On Demand Registration Code (or ID).

This is the code unique to each 540D V2. Your code can be found in the

540D V2’s ‘Preference Page’ menu under ‘DivX VOD’.

. .

FILE 1

FILE 2

FILE 3

FILE 4

DivX VOD

-- Preference Page --

Audio ENG

Subtitle ENG

Disc Menu ENG

Parental

Password

Default

DivX VOD OK

DivX(R) Video On Demand Registration

Your registration code is: EBEEKFXU

IR Emitter

InIn Out

Control Bus

1 2 ... 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Cambridge Audio 540D Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Cambridge Audio 540D